Friday, November 14, 2014

The density of density: should density be uniform in cities or variable and concentrated?

In an earlier piece, I had explained why density was important, and even used trip survey data in Québec to plot the percentage of trips made by car versus neighborhood density, which  revealed a strong linear relationship between the two:
Auto mode share (y-axis) vs residential density (x-axis, people per square kilometer)
Density is of course measured by the population residing in a given area. However, this obscures a more complex reality of the distribution of density around the area. Two areas can have the same overall density, meaning the same population over the same area, but have wildly different patterns of density: one may be of uniform density over the entire area, with just one type of housing, the other may have great housing variety, with very dense apartment blocs in certain areas and large single-family houses in others.

So, which is better? The uniformly dense city or the unevenly dense city?

A lot of urbanists in North America are very classical, craving order and uniformity, their models are European cities with buildings of the same height built close together. I think the country that exemplifies this best is actually the UK. From what I understand, the UK has a very centrally planned form of urban development, with cities drawing up plans and all developments requiring planning permissions on a case-by-case basis, making planners extremely important and resulting in very similar developments, with a marked preference for semi-detached housing and row houses. Indeed, nearly two thirds of the British population live in such housing, and there is very little multi-family development:
Shares of population living in each dwelling type (RoC=Rest of Canada, apart from Québec)
This mode of development is most flagrant in London where many subway stations are stuck in uniform neighborhoods of row houses without any dense node anywhere. On the other hand, we have the Japanese model which is much more chaotic and tolerant of varied housing types.

For example, here is Sudbury Town station, about 15 km west of London's CBD:

Overhead view of Sudbury Town station, 15 km west of London's CBD
Closer view of station
As you can see from these aerial shots, developments seem planned, with great uniformity in housing stock and seemingly no particularly dense housing, offices or retail near the station itself. In fact, if you were to take the northern exit of the station, here is what you would see:

Google Street View from Sudbury Town station
Housing doesn't vary all that much, with row houses and semi-detached houses being ubiquitous, demonstrating well the bias of British planners towards this type of housing.
This is right next to the station

A bit further out

Still a bit further out
Now let's compare this with Tsutsujigaoka, a Tokyo train station 15 km out west of Tokyo station. It's not technically a subway station, but with trains coming in at headways of 5 minutes all day in both directions, it could as well be.

Overhead view of Tsutsujigaoka station

A closer view of the station and the high-density node around it
I hope you can see clearly how there is significant contrast between areas close to the station and those further out, with 10-story buildings right next to it and largely low-rise areas a bit further away. You can also see in the first pictures what seems to be a danchi (public housing) "village".
View from station's northern exit... contrast with Sudbury Town's
 As to housing, here is some typology of it:
Right next to station, tall condo towers, often with retail on ground floor


Low-rise single-family area away from the station

Just for curiosity's sake, the danchis down south
The British example is much less dense near the station, yet the row houses and semi-detached homes are a bit denser than the single-family areas of the Japanese example.

A thought experiment

Now that I've illustrated the two models, of uniform density and concentrated density, let's do a thought experiment. Let's take two neighborhoods, with a major destination point at the center (retail, transit station, whatever), one of them has uniform density with 2- or 3-story buildings, with 10 000 people per square kilometer (much less in the commercial center) and another with tall condos/apartments in the center, surrounded by lower-density single-family areas. In effect, the density will vary between 30 000 and 6 000 people per square kilometer.

To the left, the uniformly dense neighborhood, to the right, the one with varying density
Both have the same population of about 19 000 people. If you calculated population over the area, you'd conclude that the uniformly dense neighborhood is actually denser, with 9 800 people per square kilometer versus 8 300 for the second. This is how density varies according to distance in the two neighborhoods:
Now let's say I want to predict how likely people are to walk to the center of the neighborhood. Walking, as is instinctively evident, is very sensitive to distance. If you have to go next door, you are going to walk all the time (unless you live in a rural area where the next door is a couple of kilometers away). But as distance increases, the probability of walking decreases quickly. I have tried but failed to find data showcasing walking mode according to distance relevant to this thought experiment, so I just made this curve. NOTE: do not quote me on this curve, I literally pulled it out of my ass, just going by what I think should be true.

Using the two previous graph and the data at their base, I calculated the total probability of walking for the entire population by taking each slice of the neighborhoods and multiplying the population by the probability of walking based on average distance to center. This is what I obtained as a result:

Uniform density: 26% probability of walking to center
Varying density: 36% probability of walking to center

The reason is simple: though overall the second neighborhood is less dense, since it's much denser in the center, more people live really close to the central area than in the uniformly dense neighborhood, where density is even lower in the center than farther out because building height is the same everywhere but retail occupies a large part of the floor area in the center. And since the probability of walking is much higher if distance is smaller, then it's much better if you can get as many people to live as near to the concentration of destinations as possible.
Cumulative population living within distance of center
Note also that the average density I calculated previously was the typical average density, dumbly dividing total population by total area. This is not very representative of the density the average person experiences. It is much better to calculate weighted density. This gives more weight to denser areas. Calculating is means dividing the area into smaller blocks, calculating the density of each of these blocks, multiplying the density by the population, adding all these totals together and dividing by the total number of people.

Visually, it means this: If I plot the density of neighborhoods over the cumulative population of the two neighborhoods:
 ...the weighted density is the value for which the areas between the curve and the value equal out top vs bottom (here, the light blue and dark blue areas both are of the same size).

Doing it this way, the weighted density of the uniformly dense neighborhood is 9 900 per square kilometer, and 10 700 for the neighborhood of varying density. It reverses the previous averaging result, and is a better representation of the average density people live at.

Of course, this works if the higher density areas are near the commercial area/train station/other common destinations of trips. If density varies, but is less near the center and higher at the fringe (like, you know, Radisson station in Montréal), this is far worse than the uniform density case.

And indeed, this impact of density distribution seems to have measurable impacts. Whereas Tokyo's subway lines have respectively riderships of 12 and 8 million riders per km of track, London's Tube only has a ridership of 3 million riders per km of track per year. Another impact is that buses in Tokyo have very low ridership, but in London, since people live on average farther from subway stations due to the absence of high-density multi-family housing near most of them, buses are more used than subways, however bus trips are very short (1,6 mile on average in 2001 according to this data... sounds like a last mile problem).

Conclusion

As the most efficient mode of transport is walking and walking is very distance-sensitive, if we want to maximize the mode share of walking trips, then it is important to be ready to allow higher density developments near popular destinations: offices, groceries, transit stations, etc... The idea of uniform density, if it appeals to some's sense of aesthetics, is not as efficient and it doesn't respond to people's actual desires, with the supply of housing in highly desirable areas being artificially limited to be equal to the supply of housing in undesirable areas of the same size. More efforts should be put towards increasing density significantly near commercial/job/transit nodes rather than increasing the density of all neighborhoods at once.

6 comments:

  1. I think the reason you can't find a good metric on walk mode versus distance is because distance isn't the only factor, environment plays a big role too. One can walk for miles through the streets of a Paris without blinking an eye, but try to cross a 9-lane suburban arterial stroad to get from Wal-Mart's parking lot to Applebee's, which may only be a few hundred feet, and it just won't happen. Steve Mouzon has written a fair bit on this "walk appeal" aspect. http://www.originalgreen.org/blog/walk-appeal.html

    So I'd say your probabilities of walking in the uniform versus varied densities could very well be even more different than they are, maybe more like 20% versus 50% just to take a complete guess at it. The people in the uniform density setting are less likely to walk as far because it's not as good a pedestrian environment, and more of them are farther away from the center due to the uniform density. In the varied density city, the people at the edge have an even worse pedestrian environment, but there's fewer of them and they don't have to walk as far to get to the exciting part of town. It's all a matter of the specific distances and densities of course, but I think there's more dynamic forces at work here.

    ReplyDelete
  2. There's another aspect of uniform density apart from the one you address here.

    You discuss whether a neighborhood is denser at its center than at its edges, but that neighborhood exists in a city that could also be denser at its center than at its edge, or vice versa.

    In Tokyo, for example you'll find that the density of the central Tokyo To wards is around 150/ha. The non-ocean, non-greenbelt density of the populated parts of Yokohama, Saitama, and even Chiba are generally at least 80/ha as are the rest of the contiguous region. Mexico City has even more even density where in the Historic Center, suburban Coyoacán, outer suburban Ciudad Nezahualcóyotl, and canal and lake zone Xochimilco the vast majority of neighborhoods have a density between 100/ha and 200/ha with little variance between center and periphery.

    Meanwhile New York has its central neighborhoods in Manhattan at 400/ha and the majority of its suburban communities around to 20-30/ha. And Moscow has lower density in its center than in its suburbs.

    So a city as a whole can have an even density like Tokyo even as its neighborhoods have well defined dense centers. Or a city's neighborhoods can be planned to be uniform within even while the city as a whole spreads and sprawls out swallowing ever more land at ever less density like New York.

    The two axes may be unrelated or not. I don't know, but the local and metropolitan scale can look very different.

    ReplyDelete
    Replies
    1. There are various approaches to metropolitan densities, yes. However, we have to be careful, density is often spoken of as residential density, but there is also job density. Moscow for instance has next to no one living in the downtown area, but the area is still very densely built, it's just job density rather than residential density. Likewise, Tokyo's center may not seem all that dense compared to its suburbs, but that's because most of the floor space is commercial or office space. Moscow is not really a model as it creates huge transport needs, far more than would be needed if there were more jobs spread around the region.

      The point of my article was that to maximize the benefits of density, you can't just look at overall density, it matters where density is, whether it is close to destinations or not.

      Delete
  3. True, although I think Tokyo and many European cities might have more expansive CBDs so that more evenly mixed residential-commercial areas are further out and the highest residential densities are maybe 2-5 miles out instead of 1-2 miles out for most American (and Canadian) cities.

    ReplyDelete
  4. I suspect the uniform nature of density in London (and other English cities) is due not so much to a classical desire for harmony and order, but more because the English have an extremely strong preference for living in houses rather than apartments?

    I say English rather than British deliberately, as the Scots seem to be far more comfortable with apartment living -- to the extent that Scotland is the only part of the Anglophone world where the word "tenement" has no pejorative connotations.

    ReplyDelete
    Replies
    1. There is certainly a cultural factor and a preference for single-family housing. However, is that preference consumer preference or planner preference? Considering the extremely strong influence planners have on developments in Britain, putting housing supply strictly under their control, I think this may be largely a self-fulfilling prophecy. Planners think people only want single-family housing so only plan for this, leading to more and more people living in single-family housing.

      Signs of actual consumer preference would be significantly lower price per square meter for flats rather than homes or even high vacancy rates for flats. Unfortunately, I don't know where to get that data.

      Delete